Stop your Mokai NOT your motor!!

 Painless Clutch 

Designed to let you stop without shutting your motor off, and built to last. The Painless Clutch gives you the flexibility to maneuver like you never have before. Quit dealing with hot starts, just go to idle instead while you navigate the shallows. Glide over weeds and debris instead of scrambling to shut the motor off in time, just go to idle! The Painless Clutch is CNC machined for precise fit and finish, and given a tough powder coated finish. You won't know how you lived without one. Salt water use not recommended.

*A Note on engagement RPM speeds. The stock spring I use in all the Subaru model clutches is for 1900 RPM. Lower engagement speeds have not been user friendly and are not recommended. Honda models get 2100 RPM since they do not idle as well as the Subaru. You can order the lower RPM spring for the Honda, but it is up to you to figure out how to adjust the idle speed to be compatible. 

Stop your Mokai NOT your Motor!!



Spline Style - ( Early Spline Models Only)
Engagement RPM


Remote Grease Hull Bearing 



 Quit pulling your Engine and Pump out to grease the hull bearing!!


Pump Rebuild   Your pump should move water, not be filled with it! This rebuild is recommended for all models and converts the design to oil lubrication and needle thrust bearing along with better seal design for less friction and more reliability. That equals more speed! 


Email to order. 


Aluminum Wear Ring 



This is your last wear ring - Can be resurfaced forever with JB Marine Epoxy!!

Choose Year Model

Steering Relocation Kit



Tired of hitting your leg on the steering stick? Move it up to the deck for the ultimate in comfort and control!!


Replacement Steering Cable 



Replace the old tired steering cable on your classic one piece hull Mokai for a huge savings over the factory!





Keep the wind and spray off of you with this heavy duty polycarbonate windshield. Fits all models!


Magnetic Oil Fill Plugs 

(Subaru ONLY)



 Protect your Subaru engine from leaks and metal shavings with these magnetic oil fill plugs!!



Shaft Rebuild 


 I can rebuild your stripped shaft, or convert your pin or hex profile shafts to the current splined configuration!! 


Email to order. 


Stainless Water Cooled Muffler 

(Subaru/Tillotson ONLY)


Cool and quiet!! This is the last muffler you will ever need. Built like a tank with stainless body and water chamber, this muffler will keep your engine and ears happy mile after mile. 

Muffler w/ all plumbing 

Subaru $450

Tillotson/HondaGX $460

Fiberglass muffler cover $170

Email to order. 



 Mokai Manufacturing, INC. is not affiliated with this site or products, nor does it endorse either in any way.

All content Copyright 2011-2022 Painless Enterprises